Model 6739i IP Phone Installation Guide 11
Installation and Setup
Connecting a Handset, Headset, or DHSG Headset
Handset
To connect the handset to the phone:
1. On the back of the phone base, locate the handset port marked .
Insert one end of handset cord into the port until it clicks into place.
2. Route the handset cord through the channel as shown in the illustra-
tion on page 12.
3. Attach the handset to the other end of the handset cord.
Headset (Optional)
To connect a headset to the phone:
1. On the back of the phone base, locate the headset port marked .
Insert the headset cord into the port until it clicks into place.
2. Route the headset cord through the channel as shown in the above illus-
tration on page 12.
DHSG Headset (Optional)
You can attach an optional DHSG headset to the 6739i IP Phone if required.
To connect a DHSG headset to the phone:
1. On the back of the phone base, locate the DHSG port marked
AUX.
2. Attach your 3rd party DHSG headset cable to Aastra’s DHSG jack.
Note: DHSG headsets may require further configuration before use. Refer to your
headset documentation or contact your headset vendor for more information.
