Overview of running a study
Resetting the dosimeter
053-644, Rev E Page 35 eg4 & eg3
The Edge can be reset through the dosimeter keypad or via QSP-II. The steps below outline how
to reset your dosimeter.
Reset
1. Ensure the meter is Off.
2. Turn the meter on by pressing the on/off enter button.
3. When the splash screen appears, press and hold the run/stop and on/off enter
buttons until the splash disappears.
Figure 4-5: Splash screen
4. The Setup menu appears on the Edge. Press the up or down arrow to select the reset icon
(symbol).
NOTE: Setup menu is used to reset the dosimeter, change the contrast, and return to the
main view.
Figure 4-6: Resetting the Edge from the keypad
5. Press and hold the on/off enter button.
A 3, 2, 1 countdown will appear, and then a shaded bar will appear indicating the dosimeter is
being reset.
6. Press the down arrow until the checkmark icon is selected (denoted by the arrows). Then,
press the on/off enter button to return to the measurement view screen.
Arrows and enter key
Indicates the valid keys
are selected
Checkmark icon
Is the selection to
exit the setup menu
