118 CHAPTER 12: COMMAND LINE INTERFACE
■ Specify an IP address to be traced
Specifying Basic IP
Configuration
You can use the
basicConfig command on the IP menu to configure the
IP stack of the Webcache. This will allow you to manage the Webcache
over IP via the CLI or Web interface. This command allows you to
configure the IP address, subnet mask and the default router IP address.
To configure basic IP management:
1 At the Top-level menu, enter:
protocol ip basicConfig
The following prompt is displayed:
Enter IP address [196.168.100.1]:
2 Enter a valid IP address.
The following prompt is displayed:
Enter Subnet mask [255.255.255.0]
3 Enter a valid subnet mask.
The following prompt is displayed:
Enter Gateway IP address [196.168.100.2]:
4 Enter a valid gateway IP address.
Specifying Domain
Name System
Configuration
You can use the
dnsConfig command on the IP menu to configure the
Domain Name System settings of the Webcache. This command allows
you to configure the host name, domain name and the Domain Network
System (DNS) server address.
To configure the Domain Name Settings:
1 At the Top-level menu, enter:
protocol ip dnsConfig
The following prompt is displayed:
Enter host name:
2 Enter a valid host name.
The following prompt is displayed:
Enter domain name
3 Enter a valid domain name.
