A SERVICE OF

logo

Managing Switch Fabric Modules
89
Reset Standby Switch
Fabric Module
Reset the standby switch fabric module.
Command Actions
Command Result
Example
Enter:
1 4 3 1
The following prompt is displayed:
Do you really want to reboot the switch? [y/n]
y
The switch is rebooted and the following messages are displayed:
Bootstrap V1.10 Jul 7 1998
CB9000 3Com NCD
============================
Moving the file from FLASH to DRAM ....
Going to operational code ....
Enter the menu sequence:
(1) SYS: Platform configuration
(4) SWM: Switch modules
(3) SSM: Stand-by Switch Module
(1) RSS: Reset Stand-by Switch
Module
Direct access sequence:
1 4 3 1
System action taken:
The standby switch fabric module is reset.
System message display:
Information is displayed as shown in the example.