Filter
Top Products
B
Cleaning the Air Intake Filters
C
Cleaning the Headset Tube and Headset
1
2
3
4
5
11
1
Maintenance Maintenance
Troubleshooting
Danger
Turn off the unit and remove the Power Cord
from the electrical outlet before maintenance to
avoid electrical shock.
Pull off the Intake Filter Panel on the
rear of the machine.
Rinse thoroughly with warm tap water.
Shake out water, put in a dry place and
allow to air dry.
Replace the Intake Filter.
Clean the Intake Filter once a month. If
the Oxygen Bar is used frequently, the
Intake Filter will have to be cleaned
every two weeks.
During the use of Oxygen
concentrator, there will be
water condensation in the
condensation chamber
and headset tube. Proper
cleaning is necessary if not
used for a long period of
time.
2
2
1
3
Separate the Condensation chamber and front part of headset
tube from unit, and rinse these parts with warm water and allow
the parts to air dry.
Re-attach the parts to the unit.
Oxygen Outlet
D
Cleaning the Cabinet
Wipe the cabinet with a soft, moist, clean cloth.
Do not use washing detergent, benzene, thinner or alcohol.
A : Unit does not turn on
1. Check power switch located on the back of the machine to insure it is on.
2. Check power source and connections.
3. Check that your wall outlet is live.
4. Check that power cord is not damaged.
B: Motor runs, but no oxygen is emitted.
1. Check all hose connections.
2. Check for damaged hoses or hose kinks.
3. Check that filters are clean.
C: Limited oxygen flow
1. Check for damaged hoses or hose kinks.
2. Check voltage of wall outlet.
3. Check that filters are clean.
Oxygen OutletAttach the Parts
2
3
Separate the Condensation chamber and front part of headset
tube from unit. Rinse these parts with warm water and allow the
parts to air dry.
Re-attach the parts to the unit.
Filter
Intake
Filter
Panel
10 11
B
Cleaning the Air Intake Filters
C
Cleaning the Headset Tube and Headset
1
2
3
4
5
11
1
Maintenance Maintenance
Troubleshooting
Danger
Turn off the unit and remove the Power Cord
from the electrical outlet before maintenance to
avoid electrical shock.
Pull off the Intake Filter Panel on the
rear of the machine.
Rinse thoroughly with warm tap water.
Shake out water, put in a dry place and
allow to air dry.
Replace the Intake Filter.
Clean the Intake Filter once a month. If
the Oxygen Bar is used frequently, the
Intake Filter will have to be cleaned
every two weeks.
During the use of Oxygen
concentrator, there will be
water condensation in the
condensation chamber
and headset tube. Proper
cleaning is necessary if not
used for a long period of
time.
2
2
1
3
Separate the Condensation chamber and front part of headset
tube from unit, and rinse these parts with warm water and allow
the parts to air dry.
Re-attach the parts to the unit.
Oxygen Outlet
D
Cleaning the Cabinet
Wipe the cabinet with a soft, moist, clean cloth.
Do not use washing detergent, benzene, thinner or alcohol.
A : Unit does not turn on
1. Check power switch located on the back of the machine to insure it is on.
2. Check power source and connections.
3. Check that your wall outlet is live.
4. Check that power cord is not damaged.
B: Motor runs, but no oxygen is emitted.
1. Check all hose connections.
2. Check for damaged hoses or hose kinks.
3. Check that filters are clean.
C: Limited oxygen flow
1. Check for damaged hoses or hose kinks.
2. Check voltage of wall outlet.
3. Check that filters are clean.
Oxygen OutletAttach the Parts
2
3
Separate the Condensation chamber and front part of headset
tube from unit. Rinse these parts with warm water and allow the
parts to air dry.
Re-attach the parts to the unit.
Filter
Intake
Filter
Panel
12
way 2way 1
A
77
Benefits of the Oxygen Bar Operation
3
4
Press the Power Switch (at the rear lower position) to " " (ON) position.
The status is standby and on the operation panel, there is no indication light.
Position the Headset over your ears and adjust the position of the flexible arm.
Press the On button to start the machine.
The fixed time setting is 10 minutes and the music does not operate.
Set the running time by pressing the Start Timer Button as follows :
Position the headset ( two ways ) :
Time Setting
5
6
7
Moving the arm in an
up/down direction to adjust
the oxygen inlet.
Oxygen Inlet
Big Hole
Big Hole
Small Hole
Small Hole
( Feel comfortable and soft )
( Squirt the large
flow of area )
Press the Button one time and the unit will run 20 minutes, and the 20
minute indicator window will light.
Press the Button two times and the unit will run 30 minutes and the 30
minute indicator window will light.
Press the Button three times and the unit will run 40 minutes and the 10
minutes and 30 minutes indicator window will light.
Press the Button four times and the unit will run 50 minutes and the 20
minutes and 30 minutes indicator window will light.
Press the Button five times and the unit will run 60 minutes and the 10
minutes, 20 minutes and 30 minutes indicator window will light.
Press the Button one time again and the unit running time will be circulated
to 10 minutes.
Oxygen creates life by converting fuel (carbohydrates, fats and proteins) into energy
during aerobic respiration. Low levels of oxygen result in lower energy production making
us feel sluggish and drained of energy. Additional oxygen can benefit people from every
walk of life in virtually all that we do. Studies have shown that there are multiple benefits
to using concentrated oxygen. When adding concentrated oxygen to your weekly routine,
various improvements can result. Some of the benefits include:
• Oxygen improves general well being
*7
• Oxygen heightens concentration, alertness and memory *2
• Oxygen gives you energy! 90% of our energy comes from oxygen, and only 10% from
food and water *4
• Oxygen helps keep energy levels which allows longer exercise sessions,
which helps weight loss *1
• Oxygen is vital to your immune system, memory, thinking and sight *3
• Oxygen promotes healing and counters aging *6
• Oxygen strengthens your heart, reducing the risk of heart attacks *2
• Oxygen calms your mind and stabilizes your nervous system *3
• Oxygen speeds up the body's recovery after physical exertion *5
• Oxygen provides a natural remedy for headaches, migraines and hangovers *2
• Oxygen relieves temporary altitude discomfort *6
• Oxygen improves digestion and cell metabolism *4
• Oxygen relieves muscle stiffness, supports pre-athletic performance *1
• Oxygen lessens chronic fatigue syndrome and gives you better sleep patterns *6
References:
1.) Mechanisms of dyspnoea relief and improved exercise endurance after furosemide inhalation in COPD, Thorax
1993;48:708-713; doi:10.1136/thx.48.7.708, BJ Lipworth
2.) Long-term oxygen therapy improves health-related quality of life, C. Lewis , P. Young , Y. Kennedy , J. E. Garrett and J. Kolbe
Respiratory Medicine, Volume 98, Issue 4, Pages 285-293
3.) Long-Term Oxygen Therapy, Stephen P. Tarpy, M.D., and Bartolome R. Celli, M.D. Volume 333:710-714 September 14, 1995
4.) Oxygen Therapy in Chronic Obstructive Pulmonary Disease Proceedings of the ATS, May 1, 2008; 5(4): 513 - 518.
5.) Recommendations on the use of exercise testing in clinical practice, Eur. Respir. J., January 1, 2007; 29(1): 185 - 209.
6.) Oxygen: the good, the bad, and the necessary...Thorax, December 1, 2004; 59(12): 1005 - 1006.
7.) Acceptability of oxygen concentrators: the patient's view Br J Gen Pract. 1990 Oct;40(339):415-7
B
Changing the Air Intake Filters
C
Cleaning the Headset Tube and Headset
1
2
3
4
5
11
1
Maintenance Maintenance
Specifications
Danger
Turn off the unit and remove the Power Cord
from the electrical outlet before maintenance to
avoid electrical shock.
Pull off the Intake Filter Panel on the
rear of the machine.
Rinse thoroughly with warm tap water.
Shake out water, put in a dry place and
allow to air dry.
Replace the Intake Filter.
Clean the Intake Filter once a month. If
the Oxygen Bar is used frequently, the
Intake Filter will have to be cleaned
every two weeks.
Intake
Filter
Panel
During the use of Oxygen
concentrator, there will be
water condensation in the
condensation chamber
and headset tube. Proper
cleaning is necessary if not
used for a long period of
time.
2
2
1
3
Separate the Condensation chamber and front part of headset
tube from unit, and rinse these parts with warm water and allow
the parts to air dry.
Re-attach the parts to the unit.
Oxygen Inlet
D
Cleaning the Cabinet
Wipe the cabinet with a soft, moist, clean cloth.
Do not use washing detergent, benzene, thinner or alcohol.
Oxygen InletAttach the Parts
2
3
Separate the Condensation chamber and front part of headset
tube from unit, and rinse these parts with warm water and allow
the parts to air dry.
Re-attach the parts to the unit.
B
Cleaning the Air Intake Filters
C
Cleaning the Headset Tube and Headset
1
2
3
4
5
11
1
Maintenance Maintenance
Troubleshooting
Danger
Turn off the unit and remove the Power Cord
from the electrical outlet before maintenance to
avoid electrical shock.
Pull off the Intake Filter Panel on the
rear of the machine.
Rinse thoroughly with warm tap water.
Shake out water, put in a dry place and
allow to air dry.
Replace the Intake Filter.
Clean the Intake Filter once a month. If
the Oxygen Bar is used frequently, the
Intake Filter will have to be cleaned
every two weeks.
During the use of Oxygen
concentrator, there will be
water condensation in the
condensation chamber
and headset tube. Proper
cleaning is necessary if not
used for a long period of
time.
2
2
1
3
Separate the Condensation chamber and front part of headset
tube from unit, and rinse these parts with warm water and allow
the parts to air dry.
Re-attach the parts to the unit.
Oxygen Outlet
D
Cleaning the Cabinet
Wipe the cabinet with a soft, moist, clean cloth.
Do not use washing detergent, benzene, thinner or alcohol.
A : Unit does not turn on
1. Check power switch located on the back of the machine to insure it is on.
2. Check power source and connections.
3. Check that your wall outlet is live.
4. Check that power cord is not damaged.
B: Motor runs, but no oxygen is emitted.
1. Check all hose connections.
2. Check for damaged hoses or hose kinks.
3. Check that filters are clean.
C: Limited oxygen flow
1. Check for damaged hoses or hose kinks.
2. Check voltage of wall outlet.
3. Check that filters are clean.
Oxygen OutletAttach the Parts
2
3
Separate the Condensation chamber and front part of headset
tube from unit. Rinse these parts with warm water and allow the
parts to air dry.
Re-attach the parts to the unit.
Filter
Intake
Filter
Panel