Walgreens BD-1234W Blood Pressure Monitor User Manual


 
22 23
Troubleshooting
Error/Symbol What Does It Mean? How To Fix It
You have been ignoring
the flashing replace
battery symbol ( ).
Replace with four new
"AA" alkaline batteries.
Make sure the polarities
are positioned correctly
in the battery
compartment before
continuing to measure
your blood pressure.
Replace with 4 "AA"
batteries so you may
continue to measure
your blood
pressure without any
interruptions.
Read page 16 (Applying
the Cuff).
Remove then reinsert
the batteries and then
proceed to take
measurement again.
Blood pressure
value seems too
high or too low
Circuitry locked.
Read page 16
(Applying the Cuff).
The cuff may not be
positioned correctly.
Unable to take a
measurement after
receiving an error
symbol.
Blood pressure
value seems too
high or too low
Cuff may not be
aligned correctly.
The batteries have run
down.
Troubleshooting
Error/Symbol What Does It Mean? How To Fix It
Monitor may have been
inflated without the cuff
around the arm OR
Cuff may not be
positioned correctly on
the arm.
The cuff tube may be
folded
OR
You may have
moved while the cuff was
inflating.
Read page 16 (Applying
the Cuff).
Read pages 14 & 15
(Important Reminders).
You may have moved
or spoken during the
measurement process.
You may have been
startled by a noise or
vibration while
measuring.
Remember that it is
important not to move
and speak as it may
elevate measurements.
Make sure you are in a
quiet and comfortable
place when taking a
measurement.