Filter
Top Products
6
• Exhausted batteries are to be removed from the toy.
• The supply terminals are not to be short-circuited.
• The toy is not to be connected to more than the recommended
number of power supplies.
• Do not dispose of batteries in re.
WE DO NOT RECOMMEND THE USE OF RECHARGEABLE
BATTERIES.
ASSEMBLY INSTRUCTIONS
1. To install the front wheels onto the zebra
body, rst put one wheel on the end of
the axle, then thread the axle through the
zebra body. Attach the other wheel to the
end of the axle.
2. Attach the fastener to the end wheel,
aligning the pin on the fastener with the
hole in the axle. Push the pin down into
the hole. Align the wheel cover over the
fastener, then tighten the two shorter
screws with a screwdriver.
3. To attach the left and right handles to
the zebra’s head, insert them into the
corresponding holes on the sides of the
head. You will hear a loud ‘click’ sound.
This indicates that the handles are
securely xed into the head.
Assembly Instructions
With the VTech
®
Jungle Gym™ 3-in-1 Learning Zebra Scooter™,
safety comes rst. To ensure your child’s safety, please only assemble
this product by an adult.