Filter
Top Products
Vicks recommends that for 15 minutes prior to use, avoid eating or
drinking any liquids, exercising, taking showers or baths, or smoking.
ᮣ
Remain still and quiet during measurement.
ᮣ
Accuracy of reading depends on the proper placement of the thermometer.
ᮣ
Use a new probe cover before each use.
ᮣ
Thermometer is to be turned off before attempting to
repeat process.There should be one minute intervals
between taking temperature.
ᮣ
The thermometer will automatically shut off in one minute
after use.
Operation Instructions:
1. Either pull out the probe from its holder or press the Power
( ) button until you hear one beep. All symbols and
number segments will be displayed and the backlight will
come on (Fig. 1).
2. Place a new probe cover on the probe (recommended).
3. The result of the previous reading will be displayed for 2
seconds (Fig. 2) along with the backlight. The “hourglass”
symbol ( ) indicates that the thermometer is preparing
for use (2-3 seconds).
DIRECTIONS FOR USE
Fig. 1
Fig. 2
8
V940 OM.qxd 12/28/05 11:17 AM Page 8