Toshiba EM-31061A Scale User Manual


 
EMl-31061A
8. TROUBLESHOOTING
6. TROUBLESHOOTING
8. TROUBLESHOOTING
I
Problems
I
Solution
‘I
- - - - -
is
displayed at
power on.
l
Was the power turned ON when something was on the platter?
+ Make sure nothing is on the platter and turn the power on
again.
l
Is the platter mounted correctly?
--, Mount the platter correctly and turn the power on again.
.
Display is not stable.
l
Is anything touching the platter?
+ If so, remove it.
l
Does wind blow into the room from the outside?
--) Avoid locations subject to the wind.
9. BEFORE YOU CALL FOR SERVICE
It is our primary concern to give you full satisfaction and better service.
If, however, any problem arises in
connection with the operation of this scale, please check the following points before calling for service.
l
Is the power plug fully plugged into an AC outlet?
l
Is AC power being properly supplied to the outlet? (Check it using another electric appliance.)
l
Check the circuit breaker.
l
Has there been a power failure of any sort?
WARNING:
This scale has been manufactured under strict quality control. If you have trouble, however, DO
NOT A77EMPT TO FIX BY YOURSELF. Pull the power plug out of the AC out/e?, and contact your
TEC representative.
8-
1