Filter
Top Products
8. REMOVAL AND REPLACEMENT OF RECEIPT/LABEL
8. REMOVAL AND REPLACEMENT OF RECEIPT/LABEL
8-1
8. REMOVAL AND REPLACEMENT OF RECEIPT/LABEL
1. Open the printer cover and turn the head-up lever to the anticlockwise.
2. Pull out the roll stopper and backing paper stopper, then remove the receipt/label core with the
backing paper. You can loosen the backing paper by turning the paper winding shaft anti-
clockwise.
3. Put a new receipt/label roll over the media shaft and fix it with the roll stopper.
Head-up Lever
Receipt/Label Core
Roll Stopper
Backing Paper Stopper
Paper Winding Shaft
Media Shaft
Receipt/Label
Roll Stopper
Backing Paper (Labels only)