Filter
Top Products
14-20
14. OPERATING PROCEDURES
EM1-31064
14.13 FLOATING VENDOR
14.13 FLOATING VENDOR
Menu: REG
Mode: WEIGH, FIX, or BY COUNT
Floating vendor function allows you to register different commodities sales together. This function is
available when the Initial Setting #11-1 is set to 1 and using a receipt.
Be sure to select IN-LINE in Section 11.15 LON SYSTEM even if no scale is connected, then enter
the ID# 1, turn the power off and then on.
Maximum number of registerable commodities
One scale: 200 commodities
One vendor: 99 commodities
NOTES: 1. Print format varies depending on the settings of the
Initial Setting #11-1, 11-2, 11-3, 11-4 and 11-7.
2. Care must be taken for the following when a clerk
label is printed.
(1) Cleark labels can not be used with Floating
Clerk (receipt) in a system.
1) The clerk accumulation memory is used for
the Floating Clerk's.
If the Clerk labels and Floating Clerk are
used in the same system, the registered
data by Floating Clerk (receipt use) and
Clerk labels will be stored into the same
memory.
Enter the PLU#
20
PLU
Press the speed key to which
the group vendor # is assigned.
Press the speed key the
vendor # is assigned to.
Enter the last digit
of the number.
<REG.>
APPLE 10
1
UNIT/$
1.00
lb
1.000
TOTAL $
1.00
Press:
Place a commodity on
the platter.
Group Vender
Direct Vendor
(Sample label)
Clerk name
<
Vendor #
Item Count