Filter
Top Products
80
Sand Pro
®
/Infield Pro
®
2020 Specifications* (continued)
The Sand Pro 2020 are manufactured
in Tomah, WI ISO 9002 Certified Plant.
* Specifications and design subject to change without notice. Products depicted in this literature are for
demonstration purposes only. Actual products offered for sale may vary in design, required attachments
and safety features. Consult your local Toro Distributor.
“Vanguard” and “Magnetron” are registered trademarks of the Briggs & Stratton Corporation.
“Donaldson” is a registered trademark of the Donaldson Company.
**Must be used in conjunction with Finish Grader (08867).
SAND PRO/INFIELD PRO ATTACHMENTS & ACCESSORIES
TOOTH RAKE, 08812
72" (183 cm) width, with 3 rake sections, 27 prongs adjustable for depth and wear. Adjustable trowels, drawbar position for
variable aggressiveness. Hydraulically raised for transport. Weights available for drag sections.
SPRING RAKE, 08813
76" (193 cm) width, with 5 individual rake heads. Hydraulically raised for transport.
WEEDER/CULTIVATOR,
08815
38" (97 cm) width, with 5 sets of double shovels. Mounted close to rear wheels for improved ground following and reduced
gouging. Hydraulically lowered, spring raised. Operates independently of Tooth Rake and Spring Rake.
DOzER BLADE, 08821
40" (102 cm) width, reversible blade. Loop handle for blade control with either hand. Transport lock-up with handle storage
position. Side-to-side flex design for improved ground following. Optional 60" (152 cm) Blade also available.
DRAG MAT, 08850
6.5' x 6' (1.9 m x 1.8 m) Keystone drag mat with transport stands. Used in conjunction with Hitch Kit to drag greens and tees.
SPIKER, 08856
Description: Spiker consists of 2 units each with 12 spiker blades and 11 hold down fingers. Each unit floats independently of the
other and is hydraulically pressured into the ground and allowed to float up and down by means of a spring.
Blade: High carbon steel, .105" (.26 cm) thick. Special profile design for minimum disturbance of soil surface when spiking,
73/4 dia. (1.9 cm).
Specifications:
Weight: 280 lbs. (127 kg) Unit Working Width: 57.6" (146 cm)
Working Depth: 1.25" (3.2 cm), max. Working lbs./Blade: 23.1 lbs. (10.5 kg)/blade
Blade Spacing: 2.4" (6.1 cm)
TURF TIRE, 95-5849
22 x 11.00-8. Tire pressure: 4-6 psi (27.5 kPa).
FINISH GRADER,
08867
Consists of bar plow and scarifier. Adept at light ground maintenance and grooming. Hydraulically raised and lowered, with spring
loading to regulate down pressure.
Dimensions:
Weight: 200 lbs. (91 kg) Length: 10" (25 cm)
Width: 66" (168 cm) Height: 10" (25 cm)
CYCLONE™ 1000
BLOWER, 08857
2100 rpm fan generating 2850 cfm. PTO drive with single B section drive belt. Quick-attach with two pins and connect drive shaft.
Clutch: Lever engagement back side belt tensioner. Weight 180 lbs. (82 kg).