Filter
Top Products
11
TOPCOM BPM WRIST 3301
ENGLISH
11.2 PROCEDURE
1. Press the POWER button. All digits
will light up, checking the display
functions. The checking procedure
will complete after about 2
seconds.
2. After all symbols appear, the
display will show "0" with the
designated Memory Zone. At this
time,the monitor is "Ready to
Measure".
3. Press the START button. Once the
monitor automatically inflates the
cuff to approximately 180 mmHg,
measurement will begin.
This monitor will re-inflate
automatically to
approximately 220mmHg if the
system detects that your body
needs more pressure to
measure your blood pressure.
4. When the measurement is
completed, systolic, diastolic and
pulse will be shown simultaneously
on the LCD screen.
When a mistake was detected
during measurement the Error
mark appears on the display