Filter
Top Products
02.38.1 User's Guide LDK 5302/60 - 2 Inch HDTV Viewfinder 1-7
ND/RE
BATT
TAPE
REC
++
+
-
AW2AW1
FL
7.55.63.2
FOC+
4.7
!
Viewfinder Indicators
Gain indicators
The gain indicators in the viewfinder light as follows:
- Gain is - (-3, -6dB)
+ Gain is + (+3, +6, +9dB)
++ Gain is ++ (+6, +9, +12dB)
+ and ++ Gain is +++ (+12dB))
Top indicators
REC lights when the camera is on-air.
TAPE lights when the studio ISO signal is received.
BATT lights if the supply voltage is less than 11V.
ND/RE lights when an ND optical filter or the lens
range extender is selected.
FOC+ lights when the focus assist function is on.
Iris indication
Indicates the value of the iris opening (when enabled
in the VF menu).
Zebra pattern
This diagonal line pattern warns the operator that the
area affected has risen above a predetermined level
of the full scale video exposure value. Level and
contrast are selected in the VF menu.
Safe area marker
The safe area marker indicates an area that represents
80% of the whole viewfinder picture area. This is the
minimum area seen on a TV-set.
Non standard indicator
The non-standard video settings indicator (!) lights
when exposure is not set to nominal. It also lights
when black stretch or extended iris is on.
White Balance indicators
The white balance indicators light as follows:
3,2 - preset temperature of 3200K is selected
4,7 - preset temperature of 4700K is selected
5,6 - preset temperature of 5600K is selected
7,5 - preset temperature of 7500K is selected
FL - memory for fluorescent light is selected
AW1 - memory 1 is selected
AW2 - memory 2 is selected
None of these indicators light if AWC is selected.
Message box
The display time of this information message box is
set by the Info time item of the VF menu.
Centre marker
This cross marks the centre of the picture.
Cadre marker (only switchable cameras)
These dotted white lines show the limits of a 4:3
picture, or the limits of a 14:9 picture.
Zoom indication
Indicates the degree to which the lens has been
zoomed in or out if this feature is supported by the
lens. It shows 50 if not supported.
1
1
2
2
3
3
4
4
5
5
6
6
7
7
8
8
9
9
11
11
10
10