Filter
Top Products
4
You may wish to weigh ingredients in a bowl or other con-
tainer (not included). In this case, you will need to tare, or
offset, the weight of the bowl so that only the weight of the
ingredients is displayed.
1. While the scale is on, place the empty container on
the platform. Press the “TARE/ZERO” button. The weight
will reset to zero.
2. Place the item in the container. The weight of the item
alone will display.
3. To weigh additional items in the same container, continue
to press “TARE/ZERO” to tare out the weight of each
new item.
4. When weights have been tared out, the LCD will show
a negative number when the weight is removed from
the scale. To reset the scale back to zero, press the
“TARE/ZERO” button.
Tare Operation
This scale operates on an AC adapter (included) or one
9-Volt alkaline battery (not included).
Power Sources
To power the scale using the adapter, insert the connector
plug into the jack at the back of the scale, and plug the
other end into the proper electrical outlet.
Electrical Power