Taylor C810 Wheelchair User Manual


 
21
Models C810 & C812 Operating Procedures
Step 6
Remove the release material c lip, the release sheet
retainer, and the release material sheet. Take these
parts to the sink to be washed and rinsed.
Figure 38
Step 7
Repeat steps 1 through 6 for the remaining upper
platen(s).
Step 8
Wash and rinse the clips and retainers in the sink.
Set them aside for future use.
Step 9
Set the release material sheets aside on a clean, flat
surface next to the sink until further cleaning is
performed. DO NOT fold, crease, or place them
on sharp objects.
Figure 39
Step 10
Scrape the lower grill surface with the grill scraper,
from front to back.
Figure 40
Step 11
Use the wiper squeegee to push residual grease
into the grease cans.
Figure 41
Step 12
Remove, empty, and reinstall the grease cans.
Figure 42