Filter
Top Products
7. Press the “Start/Stop” button on the base unit to stop the alarm
and timer.
8. The timer will time up to 39 hours, 59 minutes and 59 seconds.
(The seconds will appear when remaining time is less than one
minute).
Clock Feature
To program the clock:
1. While the base unit is off, press the “Select”
button.The clock digits flash.
2. Press the “Hr/+” but-
ton to change the
hour. Press the “Min/-”
button to change the
minutes. Press and
hold the buttons to ad-
vance the digits quickly.
3. Press “Select”.The clock is set.
RESET: If you are having problems with the
unit, you can press the reset button on the
back of the base.This will cause the same effect as taking the bat-
teries out.The unit will reset itself.
Care and Precautions
1. Always wear a heat resistant glove when touching the metal probe
or cord during or just after cooking. DO NOTTOUCH WITH
BARE HANDS!
2. Keep the metal probe and cord away from children.
3. Sterilize metal probe each time before use.
4. Do not expose the thermometer to: water,direct heat, a hot sur-
face or direct sunlight for an extended period of time.This may
cause damage to the plastic casing or the electric circuits and
components inside.
11
Press“Select”
1
Press“Hr/+” and then
2
Press“Min/-” to set time
2
Press“Select”
3