Taurus Group Studio 2200 Hair Dryer User Manual


 
English
Hair dryer
Studio 2200
Dear customer,
Many thanks for choosing to purchase
a TAURUS brand product.
Thanks to its technology, design and
operation and the fact that it exceeds
the strictest quality standards, a fully
satisfactory use and long product life
can be assured.
Description
A Air concentrator
B Filter
C Speed and temperature selector
D Cool air button
E Foldable handle
F Diffuser
G Hanging loop
Safety advice and warnings
- Read these instructions carefully
before switching on the appliance
and keep them for future referen-
ce. Failure to follow and observe
these instructions could lead to an
accident.
Working environment:
- Do not use hair sprays or other
spray product whilst the machine is
switched on.
- CAUTION: In order to prevent over-
heating do not cover the appliance.
- Ensure that neither the air access
nor exit become either totally or
partially covered by drapery, clothing,
etc., as this increases the risk of fire.
Electrical safety:
- Do not use the appliance if the
cable or plug is damaged.
- Ensure that the voltage indicated
on the rating label matches the
mains voltage before plugging in the
appliance.
- Connect the appliance to a base
with an earth socket withstanding a
minimum of 10 amperes.
- The appliance’s plug must fit
into the mains socket properly. Do
not alter the plug. Do not use plug
adaptors.
- If any of the appliance casings
breaks, immediately disconnect the
appliance from the mains to prevent
the possibility of an electric shock.
- Do not use the appliance if it has
fallen on the floor, if there are visible
signs of damage or if it has a leak.
- CAUTION: Maintain the appliance
dry.
- CAUTION: Do not use the appliance
near water.
- Do not use the appliance near
bathtubs, showers or swimming pools.
- Do not use the appliance with damp
hands or feet, or when barefooted.
- Do not force the power cord. Never
use the power cord to lift up, carry or
unplug the appliance.
- Do not wrap the power cord around
the appliance.
- Do not clip or crease the power
cord.
- Check the state of the power cord.
Damaged or tangled cables increase
the risk of electric shock.