Filter
Top Products
Service:
- The appliance has been oiled in ori-
gin. In order to maintain the applian-
ce in a good operation conditions we
suggest greasing the blades every
time you clean it by putting a few
drops of oil on the ends of the blade,
and finally switching on the appliance
during a few seconds.
- It is recommended to replace the
outer foil once per year.
- It is recommended to replace the
inner cutter once every two years.
- Make sure that the appliance is
serviced only by specialist personnel,
and that only original spare parts
or accessories are used to replace
existing parts/accessories.
- Any misuse or failure to follow
the instructions for use renders the
guarantee and the manufacturer’s
liability null and void.
Charging the battery
Caution: A new battery is not fully
charged and must therefore be char-
ged before the appliance is used for
the first time.
- Charge the battery at an atmosphe-
ric temperature of between 4 and
40ºC.
- Make sure that the power is off
before charging.
- Connect the USB interfaces of
shaver and charger by data line, then
plug the adaptor (K) into the mains
(Fig. 1)
- A pilot light will come on to indicate
that the appliance is being charged.
Approximately 8 hours are needed
for a complete charge of the battery.
Never attempt to over charge the
battery (although it is recommended
that the first charge of the battery be
of 10 hours in duration).
- When the battery is charged dis-
connect the adaptor from the mains
supply.
NB: Do not use the appliance while it
is connected to the charger.
USB charge
- Please make sure that the power is
off before charging.
- Connect the USB interfaces of
shaver and computer by data line for
charging (Fig. 2)
- A pilot light will come on to indicate
that the appliance is being charged.
Approximately 8 hours are needed
for a complete charge of the battery.
Never attempt to over charge the
battery (although it is recommended
that the first charge of the battery be
of 10 hours in duration).
- When the battery is charged discon-
nect the computer data line.
NB: Do not use the appliance while it
is connected to the charger.
Instructions for use
Before use:
- Make sure that all the product’s
packaging has been removed.
- Ensure that the selected tension on
the voltage selector coincides with
the tension of the mains.
- Before using this product for the
first time, it is important to make a
full charge of batteries.
Use:
- Remove the protective cap (A).
- Turn the appliance on, by using the
on/off switch.
Manual i-shave 2.0.indb 17 18/07/11 19:12