Filter
Top Products
1. Product Specifications
Product Model . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . WB-300 (Basic Electronic Medical Beam Scale)
WB-300MH (Electronic Medical Beam Scale
with Mechanical Height Rod)
WB-300DH (Electronic Medical Beam Scale
with Digital Height Rod and BMI Function)
Type of Measurement . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Four (4) Half Bridge Load Cell
Capacity . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .440 lb – 0.1 lb
200 kg – 0.05 kg
Graduation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0.1 lb, 1/4 lb, 0.05 kg
Range of Height (WB-300MH and DH). . . . . . . . . . . . . . . . 22" to 82" (55 cm – 208 cm)
Height Graduation (WB-300MH and DH) . . . . . . . . . . . . . . 1/4" (1.0 cm)
Power Source . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . (3) AA Alkaline batteries (included) for
scale functions
(1) 3-volt CR123 Lithium battery (included) for
clock display
Display . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Dual panel LCD 1.0" display
(liquid crystal display)
Platform Size. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Extra Large 16" x 12" x 2-3/4" non-slip platform
Product Dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16.26" (413 mm) x 20.75" (527 mm) x 51.02"
(1296 mm)
Product Weight . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . WB-300 26.00 lb/11.80 kg
WB-300MH 27.50 lb/12.50 kg
WB-300DH 27.50 lb/12.50 kg
2. Important Notes for Users
Handling Tips
This scale is a precision instrument utilizing state-of-the art technology. To keep the unit in the best
condition, follow these instructions carefully.
• Do not attempt to disassemble the measuring platform and display.
• Avoid excessive impact or vibration to the unit.
• Place the unit in an area free from direct sunlight, heating equipment, high humidity, or extreme
temperature change.
• Never submerge in water or spill chemical liquids. To clean, use a dampened cloth and mild detergent.
• If the product will not be used for a long period, remove the batteries before storage.
Moving the Scale
The scale has two rear wheels on the back of the platform. To avoid damage, use the wheels when moving
the scale. Hold the display head securely and tilt the scale back about 30-45 degrees. Wheels will allow
easy movement. IMPORTANT: Any time the scale is moved or re-located, be sure to press the ‘Zero’ key
before use.
Disabling Key Sounds
To confirm a key operation has been selected, a “beep” will sound when any key is pressed. To disable
this sound, press the up arrow and down arrow keys simultaneously for three seconds. To re-activate the
key sound, press the up arrow and down arrow keys simultaneously again for three seconds. The volume
of this beep sound is not adjustable.
Changing Measurement Units
This function can be used to change the measurement units on the Weight display: lb, kg, and fractional
lb. The measurement unit keys are located on the left display panel. You may press this key before or
while the user is on the platform.
Press ‘LB’ to set to pound mode. Decimal weight value in pound mode (0.1 lb increments)
Press ‘KG’ to set to kilogram mode. Decimal weight value in kilogram mode (0.05 kg increments)
Press ‘LB (F)’ to set to fractional pound mode. Fractional weight value in pound mode (1/4 lb increments)
2