Filter
Top Products
Tanita TBF-531 Body Fat Monitor/Scale
6
Inserting the batteries
1. Open the battery cover on the back of the measuring platform.
2. Insert the supplied AA-size batteries as indicated.
NOTE: Be sure that the polarity of the batteries is set properly. If the batteries are
incorrectly positioned the fluid may leak and damage floors. If you do not intend to
use this unit for a long period of time, it is advisable to remove the batteries before storage.
Positioning the monitor
Place the measuring platform on a hard, flat surface where there is minimal vibration
to ensure safe and accurate measurement.
NOTE: To avoid possible injury, do not step on the edge of the platform.
Attaching the support feet (carpet use only)
Insert the support feet into the holes at the four corners on the bottom of the
measuring platform.
NOTE: Do not use the monitor on any carpeting that is more than 0.8 inches in thickness.
Do not use the support feet on hard, flat surfaces, as the unit may tip over.
Handling tips
This monitor is a precision instrument utilizing state-of-the-art technology. To keep
the unit in the best condition, follow these instructions carefully:
• Do not attempt to disassemble the measuring platform.
• Store the unit horizontally, and place it so that the PERSONAL keys will not be
pressed accidentally.
• Avoid excessive impact or vibration to the unit.
• Place the unit in an area free from direct sunlight, heating equipment, high
humidity, or extreme temperature change.
• Never submerge in water. To clean, use a dampened cloth and mild detergent. Use
alcohol to clean the electrodes.
• When you change the batteries, exchange all four batteries at the same time with
new AA-size batteries.
If you need assistance, please call our toll-free customer service number at 1-800-TANITA-8.
Preparations before use:
Open as shown
Direction of the batteries