Filter
Top Products
4
Inserting/Replacing the batteries
The battery boxes are located on the back of the measuring platform.
1. Two 3-volt CR2032 replaceable lithium batteries
Lithium batteries can typically be used for many years
before replacement is necessary. When the low battery
sign, “LO” appears on the LCD, please replace with two
new lithium batteries.
Gently remove the smaller battery cover. Press the edge
of the battery to lift and remove the old batteries. Place
new batteries positive (+) side up being sure that they are
placed under the outer edge, as shown. Replace battery
box cover. Please program the calendar and time.
2. One 9-volt replaceable Alkaline battery
The blue backlight of the LCD display is operated by one
9-volt battery. If the backlight does not work, please
replace with new battery.
Gently remove the larger battery cover and pull the old battery back from the
connections to remove it. Place new battery in same position being sure that
the positive (+) and negative (-) connections are correct. The scale accuracy
and display will function normally without the backlight display.
Weight Mode Switch
Select your preferred weight mode using the weight mode switch
located on the rear of the scale.
Positioning the unit
Place the measuring platform on a hard, flat surface where there is minimal
vibration to ensure safe and accurate measurement.
NOTE: To avoid possible injury, do not step on the edge of the platform.
Handling tips
• Do not attempt to disassemble the unit.
• Store the unit horizontally, and place it so that the buttons will not be
pressed accidentally.
• Avoid excessive impact or vibration to the unit.
• Place the unit in an area free from direct sunlight, heating equipment, high
humidity, or extreme temperature change.
• Never submerge the scale in water or spill chemical liquids on it. To clean,
use a dampened cloth and mild detergent.
• Do not drop any objects onto the platform.
KG LB