Filter
Top Products
31
930483 Rev. A
X. OPERATING GUIDE
2. To Program Your Chair:
a. Turn off power to the chair.
b. Insert QTRONIX Programmer plug
(A) into the Programmer/Charger
socket (B) on the front of the joystick.
c. Turn on power to the chair; program
as needed.
d. Remove plug and cycle ON/OFF
switch to drive chair.
Note: Review the Qtronix Programmer Owner’s
Manual for more details on how to
program your chair.
Note: Program settings that are not matched for
the capabilities of the rider can result
in serious injury. Do not alter settings with-
out the advice of your health care
professional.
C. THERMAL ROLL-BACK
Your chair has a thermal roll back circuit.
This protects the controller from damage
due to overheating. In extreme conditions
(such as repetitive hill climbing) the circuit
will decrease the power to your motors.
This allows the chair to operate at a
reduced speed.When the controller cools,
the chair will return to normal speed.
D. CIRCUIT BREAKERS
1. Notes:
Your Quickie V-121 has two styles of
battery box; Single (one circuit breaker)
and Dual (two circuit breakers, one on
each box)
• In the unlikely event of a short circuit
or heavy overload, all power to your
chair will be shut off.
• To reset your chair,depress the circuit
breaker button(s) on the battery box
lids.A few minutes wait is required
before the circuit breaker(s) will reset.
2. Repeated Shutdown:
If the chair continues to shut down
after resetting, have it serviced by
a supplier.
30
930483 Rev. A
1. Notes:
The Quickie QTRONIX Programmer lets
you adjust the control settings of the
V-121.You can customize a program for
yourself or select the standard program.
• acceleration rate
• deceleration rate
• turn acceleration
• turn deceleration
• forward speed (max & min)
• reverse speed (max & min)
• turn speed (max & min)
• steer correct
• 4-axis joystick throw
• sleep timer
• read timer
• profiles
X. OPERATING GUIDE
A. CONTROL SETTINGS
1. It is vital to match control settings to your level of function and ability.
2. Consult your health care professional and your supplier to select the best
control settings for you.
3. Check and adjust the settings every six to twelve months (or more often, if needed).
4. Adjust the control settings immediately if you notice any change in
your ability to:
• Control the joystick.
• Hold your torso erect.
• Avoid running into objects.
5. Control Settings are adjusted through the use of the Quickie QTRONIX
Programming Pad.See your supplier if you do not own a Quickie QTRONIX
Programming Pad.
Note: Quickie’s Smart Pad Programmer or Smart Box Programmer are
not compatible with the Quickie V-121 controller.
B. QUICKIE QTRONIX PROGRAMMING PAD (OPTIONAL)
Program settings beyond the ability of the rider can result in serious injury.
Consult your health care advisor before you alter settings.
A
A
B