Filter
Top Products
930476 Rev. A
III. Your Chair and Its Parts
7
Weight
115 lb. (52 kg) with swing-away
footrests and armrests, without
batteries
Drive Wheels
12" x 4" Mag (260 mm)
Tire types: Standard - pneumatic
Option - 12" x 2"
Option - airless insert
Joystick
Standard - remote (right-hand or left-
hand mount)
Option - swing-away retractable,
USCM (Universal Specialty Control
Module)
Batteries
(2 deep cycle batteries required to oper-
ate chair)
Option - 24 NF gel
Battery Charger
Standard - dual mode (Lester)
Seat Frame Dimensions
Frame width: Standard - 16", 18"
(406, 457 mm)
Option - 14", 15", 17", 19", 20", 22", 24"
(356, 381, 432, 482, 508, 558, 609mm)
Seat depth: 14"-20"(356 - 508 mm)
Seat height: Standard - 18" (458 mm),
option- 19" (508 mm), 20" (508 mm)
Seat sling: Standard - parapak,
Option - aluminum seat pan
Option-cushion: 2" (50mm)
Backrest Folding
Standard - 15.5" (393 mm)
Option - 17.5", 19.5"
(445 mm, 495 mm)
Caster Fork
Standard - fixed
Option - Suspension (8" tire only)
Footrest
Standard - Swing-away with compos-
ite footplates and heel loops, or two
piece locking.
Option - fixed tapered (80°) or fixed
straight (70°), elevating legrests,
angle-adjustable footplate, extended,
toe loops, extension tubes, solid one-
piece, two piece locking
Casters
Standard - 8" (200mm) pneumatic
Option - 8" (200mm) airless insert
9" (225mm) pneumatic
9" (225mm)airless insert
Armrests
Standard - dual post with standard or
full length pad
Option - dual post height-adjustable,
height-adjustable with standard or
full length pad
Manual Wheelchair Conversion Kit
Conversion Kit Axles
Option - quad-release axle nuts
Rear Wheels
Standard - Mag or Spoke
Tire types: pneumatic, airless
insert, full-profile polyurethane,
low-profile polyurethane, Kevlar,
high-pressure clincher
Handrim
Standard - aluminum
Option - plastic-coated, long tabs
vertical or oblique projections
Wheel Locks
Standard - Push-to-lock
Option - pull-to-lock
6" or 9" (150 mm or 230 mm)
extension handles
All features may not be available with some
chair setups or in conjunction with another
chair feature. Please consult your supplier for
more information. Your authorized supplier
can also provide you with more information
on accessories.
The Quickie P-222 SE is a class B wheelchair
as defined in EN 12184
III. Your Chair and Its Parts
930476 Rev. A
6
1. Armrest
2. Joystick
3. Seat cushion (optional)
4. Fixed front hanger
5. Caster tire
6. Two-piece, locking, flip-up
footplate (optional)
7. Backrest
8. Push handle
9. Backrest hinge plate
10. Quick-connect levers (not shown)
11. Seat frame
12. Dynamic stabilizer
13. Drive wheels
14. Base Frame
15. Caster Fork
16. Free-wheel release lever
Quickie P-222 SE
1
2
3
4
5
6
7
8
9
10
11
12
13
16
14
15