Filter
Top Products
26 27
IX. SET UP & ADJUSTMENT
IX. SET UP & ADJUSTMENT
I. HEIGHT-ADJUSTABLE
ARMRESTS (Optional)
1. Installation
a. Slide the outer armpost into the receiv-
er mounted to the wheelchair frame.
b. The armrest will automatically lock
into place.
2. Height Adjustment
a. Rotate release lever to second stop.
b. Slide armrest pad up or down to
desired height.
c. Return lever to locked position against
armpost.
d. Push arm pad until upper armpost
locks firmly into place.
3. Removing Armrest
a. Rotate release lever to first stop and
remove the armrest.
4. Replacing Armrest
a. Slide armrest back into receiver.
b. Return release lever to locked
position against armpost.
5. Adjusting Armrest Receive Fit
To tighten or loosen the fit of the outer
armpost in the receiver:
a. Loosen the four bolts on the sides
of the receiver.
b. With the armrest in the receiver,
squeeze the receiver to achieve the
desired fit.
c. Tighten the four bolts.
6. Adjusting Inner Armpost Fit
a. Two set screws are installed in the
outer armpost.
b. Turn the set screws in or out until
the desired fit is achieved.
G. FLIP-BACK ARMRESTS
Flip-back armrests are shipped standard
on Quickie LXI wheelchairs. They are
installed at Quickie.
1. Flipping Armrests Back
a. To flip armrests back, depress the
release latch and pull arm toward back
of wheelchair.
H. FLIP-BACK HEIGHT ADJUSTABLE
ARMRESTS (Optional)
Flip-back height-adjustable armrests are
installed at Quickie.
1. Height-Adjustment
a. Release the upper securing lever.
b. |Slide armpad up or down to desired
height.
c. Return lever to locked position.
2. Flipping Armrest Back and Removing
Armrest
a. Depress the release latch and pull arm
toward back of wheelchair.
b. To remove, pull up on armrest. Pin
securing armrest will automatically
release.
c. To return armrest to operating posi-
tion, push armpad down until it locks
firmly into place.
Flip-Back Height Adjustable
Armrests (Optional)
1. Armrest pad
2. Upper securing lever
3. Release latch
4. Armrest panel
5. Rear receiver
6. Armrest release pin
5
6
4
1
2
Height Adjustable Armrest
Key
1. Outer Armpost
2. Standard receiver
3. Release lever
4. Armrest pad
5. Transfer bar
6. Side panel
7. Outer armpost tension adjust-
ment set screws
8. Inner armpost
9. Receiver adjustment bolts
8
7
9