Sunbeam HD7800 Hair Dryer User Manual


 
Your 1800W Hairdryer with Diffuser has 2
heat and 2 speed settings. This combination
allows for greater versatility and control when
drying and styling your hair.
The switch marked with red numbers controls
the temperature of the airflow as follows:-
I = Low heat
II = Medium/High heat
The switch marked with blue numbers
controls the strength of the airflow as
follows:-
0=Off
I = Gentle airflow
II = Strong airflow
A combination of high temperature and
strong airflow is ideal for fast drying. Lower
temperature and gentle airflow settings give
greater control when styling.
The cool shot button provides a burst of cool
air to set the style in place once styled.
To dry hair
After shampooing and conditioning the
hair, squeeze excess moisture from your
hair using a dry towel.
Comb hair free of all tangles with a wide
tooth comb.
Plug your dryer into a power outlet and
turn the power on.
Select the desired heat and speed
combination and using your fingers dry hair
from the roots to the ends.
Use the concentrator nozzle onto specific
areas of hair for spot drying or styling
To use the diffuser, remove the concentrator
nozzle and simply push on to the barrel of
the dryer.
The diffuser is ideal to use on naturally
curly, wavy or permed hair.
Always hold the dryer at least 30 cm away
from the hair when drying.
Warning: The diffuser may become hot
after extended use. Allow to cool before
removing from the dryer or storing.
Please refer to the enclosed Guide to Styling for
a step by step guide on how to achieve a range
of looks.
If you have any additional questions about using the 1800W Hairdryer with Diffuser,
please call the Sunbeam help line in Australia on 1 800 025 059. In New Zealand please call
09 912 0747.
4
Using your 1800W Hairdryer
with Diffuser
Help Line