Filter
Top Products
6. Remain still after inflation is completed. The Monitor
will then begin deflation of the Finger Bladder automati-
cally. Pressure readings will be indicated on the left side
of display as the pressure in the Finger Bladder de-
creases; exhaust rate appears on the right side of
Display. As the Monitor continues to deflate the Finger
Bladder, the heart will start to flash in the display. (Fig. 5)
7. The Monitor will deflate automatically when measure-
ment is complete, and the resulting blood pressure
readings will be indicated in the Display. Blood pressure
readings (Systolic on the left, Diastolic on the right), will
be displayed alternately with the pulse (PUL) reading.
(Fig. 6 )
8. Display of measurement results will continue until the
power is turned off. The Monitor will shut off automati-
cally after approximately 2 minutes.
9. Wait at least 10 minutes between readings. To
discontinue a measurement for any reason, press the
Power Button. This causes the Finger Cuff to deflate
rapidly. Before removing your flnger from the Finger
Cuff, slide the Cuff Adjuster to Loose. Failure to do
so could result in damage to the Finger Cuff.