Filter
Top Products
~ 4. Insert the air
connector.into
base unit if not
already.attached.
)
5. Relax for a few more minutes after the cuff is applied before beginning
~ the measurement.
1
Left Arm
i
~
Taking Your Blood Pressure
1. Place the cuff on the arm that will be used for the measurement
(preferably the left arm). See previous section on proper cuff placement.
‘2. Remaih seated or in a reclining position during measurement.
Keep the arm
~
with the cuff as still as possible and position the cuff at heart level. Movement
during measurement could cause an error, requiring a second measurement.
3. Press the power button. When the.power’button is pressed, all of the display
symbols will appear for one second. When the “0” is displayed, the monitor is
ready for measurement. If the
“A’
mark appears, the cuff has some air trapped
in it.
Rress
the exhaust valve button until
“0”
appears.
Page 3