Sunbeam 1626 Hair Dryer User Manual


 
76
STORAGE
1. Always store dryer inside the base.
2. Do not mount or store dryer in an area with excessive heat or moisture.
3. Do not wrap cord around dryer. Allow to hang loosely from dryer.
4. Do not hang dryer by cord or use cord as a handle.
5. Store in a cool, dry place and out of reach of children.
6. Store where dryer will not be accidentally damaged from bumping or falling.
Do not put anything on top of dryer.
M
AINTENANCE, CARE AND CLEANING
1. Always unplug dryer from outlet before cleaning.
2. Clean dryer by wiping with a soft, lightly moistened cloth.
3. NEVER PUT HAIR DRYER IN WATER.
4. The motor never needs oil or grease.
5. Check the removable lint screen. It is important that you clean the removable lint
screen when hair, lint or dust begin to build up on it. To remove the screen,
rotate counter-clockwise and loosen. To clean, brush the outside of the screen
with a toothbrush to loosen lint, etc. Then turn the screen over and rinse under
a running faucet. Towel dry the screen thoroughly. If inside of screen is dirty,
brush gently with a toothbrush to clean. To replace screen, line up pegs on
inside of the screen with slots on side of unit and rotate clockwise to lock in place.
1. To remove lens:
Insert tool (screw driver, knife point, etc.)
in crevice to flex tabs.
2.Replace bulb and lamp holder as an
assembly by pulling straight out.
Each bulb can be replaced separately.
WALL MOUNT
NIGHT
LIGHT
110V-120V
POWER
SUPPLY
3-FT. P
OWER CORD
RELEASE
BUTTON
OFF
BUTTON
ON
BUTTON
REMOVABLE
L
INT SCREEN
HAIR DRYER
HIGH
MED
LOW
SWITCH
6-FT. POWER CORD
B
RACKET
SCREW
N
IGHT LIGHT F
EATURE
To change bulbs,
follow instructions below.
TOP HOUSING OF
WALL M
OUNT
3-FT. P
OWER CORD
BRACKET
SCREW
LOCKING P
LATE
STANDARD ON MODEL 001626-040-000
OPTIONAL ON MODEL
001626-020-000