Filter
Top Products
6 SATSA Installation Guide • July 2004
SATSA 1.0 Configuration Files
The SATSA 1.0 Reference Implementation contains two configuration files that,
under most circumstances, can be left as-is and do not need to be altered or
changed. These files are the following:
■ The internal.config File
■ The system.config File
Both of these configuration files are found in the directory:
%MIDP_HOME%\lib
The internal.config File
The internal.config file contains several MIDP 2.0 implementation-specific
parameters. In a default installation of the SATSA 1.0 Reference Implementation,
none of these parameters need to be changed. The parameters defined in the
internal.config file specifically for the SATSA 1.0 RI are displayed in
CODE EXAMPLE 2.
CODE EXAMPLE 2 The internal.config File
__________________________________________________________________
(......)
com.sun.satsa.keygen: true
com.sun.satsa.opaquesig: true
com.sun.satsa.certsig: true
com.sun.midp.io.j2me.apdu.hostsandports: localhost:9025,
localhost:9026
com.sun.midp.io.j2me.apdu.satselectedapdu:
00.a4.04.07.a0.00.00.00.62.3.1.7F
com.sun.satsa.store_csr_list: true
(......)
__________________________________________________________________
Many of the parameters shown above are optional and might not be supported on
a specific platform. Setting the following parameters to false allows the SATSA 1.0
Reference Implementation to simulate platforms where those parameters are not
supported (that is, to demonstrate the proper exceptions expected when the
parameters are not supported by the platform).