Filter
Top Products
Form No. 702703 Rev. E August, 2006 9
Owner’s Manual - Oxygen Therapy Door
6. On the nebulizer extension, squeeze the two ends of the
cotter pin together and remove the pin from the extension
(Figure 6).
7. Open the oxygen therapy door.
8. Place the nebulizer in the ice tray with the extension through
the opening in the door (Figures 5, 6, and 7).
9. Inside the door, replace the cotter pin through the extension
to hold the nebulizer in place and spread the two cotter pin
ends apart to keep the pin from falling out.
10. Attach the free end of the nebulizer plastic tubing to a
50 psi wall oxygen outlet or an oxygen cylinder.
Note: Your oxygen supplier is the best source to make
this connection for you.
Installation and setup is complete.
Your SSCI Oxygen Therapy Door is now
ready for use.
The shipping carton can be cut up and thrown away. If adequate
space is available, however, it might be handy to retain the carton in
case reshipment of the door to the manufacturer ever becomes
necessary for repairs.
Disposition of the
Shipping Carton
Cotter Pin
Extension
Figure 6. Nebulizer
Figure 7. Nebulizer in Place