Filter
Top Products
8 SSCI - Suburban Surgical Company, Inc.
Chapter 2 - Installation and Setup
1. With a 1/4 in. or smaller punch and a small hammer, remove
both hinge pins from the cage door (Figures 2 and 3).
2. Remove the door from the cage.
3. Open the door and, on the rear of the gauge, pull the tape
marked “REMOVE TO START” from the battery
compartment. The gauge will begin operating.
4. Hang the oxygen therapy door on the existing cage hinges
and install the original hinge pins (Figure 4).
5. Hang the ice tray on the button hooks provided on the door
(Figures 4 and 5).
Procedure
Figure 2. Hinges on a Regal Cage
Hinges
Figure 3. Door Hinge and Hinge Pin
Hinge
Hinge Pin
(shown
partially out)
Figure 4. Oxygen Therapy Door in Place
on a Regal Cage
Ice Tray
Button Hooks
Figure 5. Ice Tray in Place
Ice Tray
Opening
for
Nebulizer
Extension