Filter
Top Products
Features
Easy-start\ brushing power ramp-up
◗ All Sonicare models come with the Easy-start feature activated
(on), which helps you get used to brushing with Sonicare.
◗ Brushing power will gently increase to full power over the first
12 brushings.
◗ The Easy-start feature is active if you hear 2 beeps immediately
after turning on your Sonicare. Once you reach optimal brushing
power (after the 12th brushing), you will no longer hear the
double beep at the beginning of your brushing routine.
B
Note: each of the first 12 brushings must be at least 1 minute in length
to properly move through the Easy-start ramp-up cycle.
To deactivate or activate the Easy-start feature:
1 Attach your brush head to the handle.
2 Place the handle in a plugged-in charger base.
3 To deactivate the Easy-start feature, press and hold the power
button for 5 seconds.You will hear 1 beep to indicate that the
Easy-start feature has been deactivated.
4 To activate the Easy-start feature, press and hold the power
button for 5 seconds.You will hear 2 beeps to indicate that the
Easy-start feature has been activated.
Using the Easy-start feature beyond the initial ramp-up period is not
recommended and reduces the effectiveness of your Sonicare
toothbrush in removing plaque.
The Easy-start feature should be deactivated and the handle fully
charged when Sonicare is used in clinical trials.
Smartimer\ 2-minute timer
◗ All Sonicare models come with the Smartimer feature,which
automatically sets the brushing time to the 2 minutes
recommended by dental professionals.
◗ After 2 minutes the Smartimer will automatically turn off the
toothbrush.
◗ If you wish to pause or stop brushing during your 2-minute cycle,
press the power button. Press the power button again and the
Smartimer will pick up where you left off.
◗ The Smartimer will automatically reset to the beginning of a
2-minute cycle if:
- brushing is paused for 30 seconds or longer;
- the handle is returned to the charger base.
ENGLISH 9
4235 020 17172 16-12-2005 08:04 Pagina 9