Filter
Top Products
ENGLISH
Fitness Scale 7850
6
■ Getting started
1. Install the fitness scale level on a firm, flat surface
2. Connect the plug-in power supply unit without
standing on the scale
3. Set the clock and date
Please do not stand on the scale. Keep the + or –
Key pressed until the display shows the year.
Press the + or – key to select the required year
and confirm. Select the month by pressing the
+ or – key and confirm. Select the day by pres-
sing the + or – key and confirm. The indicator
then shows digits for setting the clock. Adjust
the hour by using the + or – key and confirm.
Do the same with the minutes and finally
confirm.
4. Insert the thermal
paper roll (58mm wide)
in the paper compart-
ment (see figure) and
pull out the paper strip
by several centimetres.
Close the lid and tap
the key “7850” briefly
to test whether the paper feeds through cor-
rectly. The printer has an easy-load function.
There is no need to feed the paper through
manually.
5. The scale is ready to operate
■ Mass unit switchover
Slide the switch on the rear at any time to switch
over the mass unit from “kg and cm” to “lb and
ft/inch“ or “st/lb and ft/inch”.
The default setting of the scale is “kg and cm".
The last unit setting is retained even when the
appliance is switched off.
■ Battery exchange:
Please change the lithium battery when time
and date settings are not correct anymore (without
power supply of the scale)
■ Weighing
Stand on the scale as still and straight as possible
while the Fitness Scale measures your weight. After
a short period of time, the weight reading appears
and the “INPUT" message flashes. If you only want
to measure your weight, you can step off the scale
now. The weight reading is printed out. Otherwise
continue as described under Body Analysis.
0.0
kg
0.0 lb
0: 0.0 lb
st
7 2.2
kg