Filter
Top Products
- 5 -
Cleaning the air suction grill
ƽ Fire hazard!
Clean the air suction grill
w
at regular intervals
with a soft brush.
➪ Lightly press together the two tabs on the air inta-
ke grille
w
that grip right and left into the hou-
sing of the hairdryer. At the same time, pull the
air suction grill
w
to the rear.
➪ Clean the opening of the air intake grille
w
with
a soft brush.
➪ Place the air suction grill
w
back onto the hair
dryer so that the tabs grip into the rails on the
housing of the hairdryer. Push the air intake grille
w
back on until it perceptibly engages.
Troubleshooting
Should your Hair Dryer not function as expected,
first remove the plug from the wall socket and allow
the appliance to cool down for a few minutes.
The appliance is fitted with an overheating protec-
tor! Should the appliance still not function, consult
the service department detailed in the chapter
"Warranty and service".
Disposal
Do not dispose of the appliance in your
normal domestic waste. This product is
subject to the provisions of European Di-
rective 2002/96/EC.
Dispose of the appliance through an approved
disposal centre or at your community waste facility.
Observe the currently applicable regulations.
In case of doubt, please contact your waste disposal
centre.
Dispose of all packaging materials in an
environmentally friendly manner.
IB_64640_SHTR2200A1_LB6 16.02.2011 15:57 Uhr Seite 5