Silvercrest SHTC 2200 B1 Hair Dryer User Manual


 
- 5 -
Cleaning the air suction grill
ƽ Fire hazard!
Clean the air suction grill
w
at regular intervals
with a soft brush.
Turn the air suction grill
w
anticlockwise so that
the arrow on the air suction grill
w
points to the
bottom arrow on the hairdryer. The air suction
grill
w
can then be removed.
Clean the openings of the air suction grill
w
with a soft brush.
Replace the air suction grill
w
back onto the
hairdryer so that the arrow on the air suction
grill
w
points to the bottom arrow on the hair-
dryer. Turn the air suction grill
w
clockwise until
the arrow on the air suction grill
w
points to the
upper arrow on the hairdryer. The air suction
grill
w
is now firmly seated.
Troubleshooting
Should your Professional Hair Dryer not function as
expected, first remove the plug from the wall socket
and allow the appliance to cool down for a few
minutes. The appliance is fitted with an overheating
protector! Should the appliance still not function,
consult the service department detailed on the
Warranty Card.
Disposal
Do not dispose of the appliance in your
normal domestic waste. This product is
subject to the provisions of European Di-
rective 2002/96/EC.
Dispose of the appliance through an approved
disposal centre or at your community waste facility.
Observe the currently applicable regulations.
In case of doubt, please contact your waste disposal
centre.
Dispose of all packaging materials in an
environmentally friendly manner.
IB_61921_SHTC2200B1_LB6 25.11.2010 8:59 Uhr Seite 5