Filter
Top Products
- 3 -
Description of the appliance
1 Face mask
2 Lid of the aroma and herb container
3 Aroma and herb container
4 Steam regulator
5 Handle of the steam controller
6 Water bowl
7 Control lamp
8 LO/HI/OFF button
9 Heating unit
0 Cable storage
q Measuring cup
Preparing the facial sauna for use
• Unwind the cable from the cable winder 0 and
guide it through the recess on the underside of
the heating unit 9.
• Place the heating unit 9 on a level, non-slip and
water resistant surface.
• Using the measuring cup q fill the water bowl 6
with water. Orientate yourself with the scale on
the measuring cup q for how long you wish to use
the appliance (approx. 5, approx.10 or approx.
15 minutes). Use the scale that is appropriate to
the respective steam setting (Hi or Lo).
Warning!
NEVER fill the water bowl 6 with a water volume that
exceeds the “Hi 15 min.” marking ( in the measuring
cup q). Otherwise, the water could overflow and
then permeate into the interior of the appliance.
This could damage the appliance irreparably!
• Place the steam controller 4 on the water bowl 6
so that the handle 5 points to the front.
• Position the face mask 1 on the heating unit 9:
The lugs on the underside of the face mask 1 must
grasp in the recesses on the steam controller 4/
the heating unit 9. Then turn the face mask 1
clockwise so that it sits firmly on the heating unit 9.
• Insert the plug into a power socket.
The Facial Sauna is now ready for use.
Utilisation
Attention!
This facial sauna may not be used if you suffer from
one of the following ailments:
• with acarodermatitis
• with erythrodermia
• with swellings in the facial area
• with heart illnesses
• with diabetes
• wounds in the facial area
• with eczema
• with psoriasis
Should you be pregnant or have other health issues,
consult your doctor before using the appliance.
Utilisation of the facial sauna prepares your skin
admirably for further treatments, for example deep
cleansing, moisture provision, face masks etc. The
steam invigorates the skin, opens the pores and
impurities can be better removed.
IB_53286_SGS100A1_LB6 16.08.2010 12:07 Uhr Seite 3