Shoprider ULWR11 Mobility Aid User Manual


 
8/16/2005
18
Troubleshooting
The Self-Help Guide (Table 1) is intended to assist in the location of a
fault that may occur in a certain part of the Powerchair.
If after checking the fault from the table below and the fault is still
showing, do not
use the Powerchair. Turn off the power and consult
your provider immediately.
Table 1
BATTERY
GAUGE
POSSIBLE VSI-50 FAULT
10 Bars flash Battery voltage is too high, check the battery connections.
9 Bars flash Solenoid brake fault
8 Bars flash Possible controller fault
7 Bars flash Possible joystick fault
6 Bars flash Battery charger connected
5 Bars flash Right-hand motor wiring fault
4 Bars flash Right-hand motor disconnected
3 Bars flash Left-hand motor wiring fault
2 Bars flash Left-hand motor disconnected
1 Bar flash Low battery voltage