Filter
Top Products
~16~
GMP
ISO9001
ISO14001
ISO13485
CERTIFIED
Safety Belt
JOYSTICK CONVERSION (right to left or left to right)
Beneath each of the arm pads there is a hand knob [Fig.10 (2)] used to adjust the
length of the arm pad and secure the arm pad to the arm rest assembly. Remove
the hand knob completely and slide off the arm pad. You can now exchange the
joystick controller from one side to the other.
SEAT HEIGHT ADJUSTMENTS (Fig.13)
WIZZ (888WNL): The four seat supporting posts under the seat have three height
adjustment holes each. By fitting the retaining pin in any one of the holes, three
heights can be achieved.
STREAMER (888WB/WAB/WSB): The tube receiving seat stem has three
(STREAMER 888WB/WAB) or two (STREAMER 888WSB) height adjustment
holes. By fitting a steel bolt in any one of the holes, the selected heights can be
achieved.
JETSTREAM-L/M (888WAL/WAM): The front and rear tube receiving posts have
three height adjustment holes. By fitting a steel bolt in any one of the holes, the
selected heights can be achieved.
SAFETY BELT AND FASTENING STRAP SETTING (Fig.13)
The installing or setting-up method is described as Fig.13.
ADJUSTMENT PROCEDURES
Fastening Strap
Fig. 13
WIZZ 888WNL
STREAMER 888WB/WAB
STREAMER 888WSB
JETSTREAM-L/M 888WAL/WAM