Filter
Top Products
7/8/2009SE
13
TRANSPORT / STORAGE
The Start 8 Portable scooter is designed to be quickly and easily disassembled into
sections for transportation and storage. Follow these simple guidelines for disassembly:
Start 8 8 Disassembly (Fig 10 & 11)
1) Remove the front basket: Lift basket
up and off.
2) Fold the seat down and remove: Pull
yellow swivel seat lever up and lift
seat up and off.
3) Remove battery pack: Turn yellow
battery pack locking lever to unlock
position. Lift battery pack up and off
using handle (Note: battery pack is
secured by Velcro).
4) Fold tiller down and lock into place:
Loosen tiller adjustment knob, lower
tiller, and tighten adjustment knob.
Lock tiller assembly so that it doesn’t
swing sideways by pulling yellow tiller lock lever up and to the right.
5) Detach rear section from front section: Detach lever is located in the rear of the
scooter next to the freewheel lever. Slide lever to “detach” and separate rear section
from front section.
1
2
3
4
5
Figure 10
1
2
3
4
5