Filter
Top Products
5/11/2007
8
Seat Height Adjustment (Fig 5)
Remove seat as described (fig 4). Remove battery
pack (refer to disassembly section). Using two 13mm
wrenches, remove locking bolt and nut. Adjust seat
post up or down to desired position. The seat height
can be adjusted to five different positions by inserting
the locking bolt in the desired hole. Replace washer
and nut and tighten. Replace battery pack and seat.
Serial Number (Fig 5)
Serial number is located on the seat post. It is on a
white sticker with a barcode. The serial number is 13
alphanumerical digits beginning with a 1.
Armrest Width Adjustments (Fig 6)
On the underside back of the seat there are two
arm rest hand knobs, one on each side. Turn
hand knobs counterclockwise to loosen.
Loosening the arm rest hand knob allows the
armrest width to be adjusted or arm rest to
be removed. Once the desired positions
of the arm rests are set, tighten the hand
knobs by turning clockwise to lock the arm
rests into place.
Armrest Adjustments (Fig 6)
The arm rests are hinged and can be pulled
up and out of the way for sideways transfer.
Pull arm rest up and back.
Arm Rest
Hand Knob
Pull Arm Up
Figure 6
Figure 5
Seat Post
Serial Number