Shoprider 888WSB Mobility Aid User Manual


 
~18~
GMP
ISO9001
ISO14001
ISO13485
CERTIFIED
GETTING READY TO KNOW THE JOYSTICK CONTROLLER (VSI 50)
On / Off Button (1)
This button turns the joystick controller (hereinafter referred to as
VSI) on and off. Do not use this button to stop the Powerchair,
except in an emergency.
Battery Gauge (2)
This is a 10-segment display, which indicates if the VSI is switched
on and gives the state of charge of the battery. Additionally, any
faults in the Powerchair’s electrical system are also indicated by this
display. Refer to Table 1 for more details.
Maximum Speed Indicator (3)
This is a 5-segment display, which indicates the maximum speed
setting selected.
Horn Button (4)
This button operates the Powerchair’s horn.
Speed Decrease Button (5)
This button decreases the maximum speed.
Speed Increase Button (6)
This button increases the maximum speed.
Joystick (7)
This controls the speed and direction of the Powerchair. Push the joystick in the
direction you want to go. The further you push it, the faster the speed will be.
Releasing the joystick will automatically engage brakes and stop the Powerchair.
OPERATION INSTRUCTIONS
(1) (2)
(3)
(4)(5)
(6)
(7)
(8)
Fig. 14
1
6
4
3
2
5