Filter
Top Products
Adjusting settings via the operating menu
23
Setting a transmission frequency for the current channel
̈ Set the desired frequency.
Selecting a frequency bank and a channel and assigning
this channel a frequency
̈ Set the desired frequency bank.
̈ Set the desired channel.
̈ Set the desired frequency.
It is vital to observe the notes on frequency
selection on page 27.
̈ Press the rocker button until the “Tune” menu
item appears.
̈ Press the SET button.
The frequency selection appears.
̈ Press the SET button.
Your settings are stored.
You are back to the operating menu.
̈ Press the rocker button until the “Tune” menu
item appears.
̈ Keep the SET button pressed until the frequency
bank selection appears.
̈ Press the SET button.
The frequency selection appears.
̈ Press the SET button.
The frequency selection appears.
̈ Press the SET button.
Your settings are stored.
You are back to the operating menu.
531 .375 MHz
Tune
532.375 MHz
B.Ch: U1. 1 B.Ch: U1. 1
Tune
Advanced
Menu
Tune
SET SET
SET
531.375 MHz
Select the MHz
value and confirm
Select the kHz
value; store the
setting
Call up “Tune”
“Stored”
Advanced
Menu
Tune
531.375 MHz
SET
SET
SET
531.375 MHz
Tune
B.Ch: U1. 1
531.375 MHz
B.Ch: U1. 1
Tune
Set the frequency
bank and the channel
Set the frequency;
store the setting
Call up “Tune”
(special function)
“Stored”