Filter
Top Products
4
Using the EK 2020 D
You can connect an induction loop or any pair of headphones with
a 3.5 mm mono or stereo jack plug to the headphone socket » of
the EK 2020 D. The headphone impedance must be 32 Ω or higher.
̈ Connect the induction loop or the 3.5 mm jack plug of your
headphones to the headphone socket » of the EK 2020 D.
To switch the receiver on:
̈ Briefly press the ON/OFF button ² .
The display ¿ switches on.
To switch the receiver off:
̈ Press the ON/OFF button ² for 3 seconds.
When you unplug the headphones from the receiver or switch
off the transmitter, the receiver automatically switches off
after 5 minutes.
²
¿
»