Filter
Top Products
a.
b.
c.
d.
Setting Date, Time and Levels
16
Setting Date, Time and Levels
Setting date and time
Press "MODE" button ("month" starts flashing)
Press "[
]" and "[ ]" button to set and adjust the correct
month (1, 2, 3 ....12)
Press "MODE" button again ("date" starts flashing)
Press "[ ]" and "[ ]" button to set and adjust the correct
date
Press "MODE" button again ("hour" starts flashing)
Press "[ ]" and "[ ]" button to set and adjust the correct
hour in 12-hour format. A "PM" will appear for PM and dis-
appear for AM.
Press "MODE" button again ("minute" starts flashing)
Press "[ ]" and "[ ]" button to set and adjust the correct
minute (00, 01, 02 ...59)
After setting the minute you will automatically be prompted to
set the personalized level for Memory Zone 1. The storage of
180 memory readings is divided into 2 memory zones, each
maintaining up to 90 memory readings. The following explains
how to set your personalized level in each zone.
Your personalized level should be decided between you
and your healthcare provider.
Before setting your levels it is important to know:
*Your systolic rate is set between 70 and 250 mmHg.
*Your diastolic rate is set is between 40 and 115 mmHg.
If the batteries have run down or are removed or the
adapter has been unplugged, the time and date will have
to be reset.