Filter
Top Products
22
23
Troubleshooting
Error/Symbol What Does It Mean? How To Fix It
Monitor may have been
inflated without the cuff
around the arm OR
Cuff may not be
positioned correctly on
the arm.
You may have moved
while the cuff was
inflating, it is now
attempting to reinflate.
Check the cuff to make
sure it’s positioned
correctly.
Read page 16 (Applying
the Cuff).
Read page 14 & 15
(Important Reminders).
Remember that it is
important not to move
and speak as it may
elevate measurements.
Make sure you are in a
quiet and comfortable
place when taking a
measurement.
You may have moved
or spoken during the
measurement process.
You may have been
startled by a noise or
vibration while
measuring.
Unable to take a
measurement
after receiving an
error symbol.
Troubleshooting
Error/Symbol What Does It Mean? How To Fix It
You have been ignoring
the flashing replace
battery symbol ( ).
Change them quickly so
you may continue to
measure your blood
pressure without any
interruptions.
Blood pressure
value seems too
high or too low
Read page 16
(Applying the Cuff).
Replace with four new
"AA" batteries. Make
sure the polarities are
positioned correctly in the
battery compartment
before continuing to
measure your blood
pressure.
The monitor keeps
reinflating
The cuff may not
be positioned
correctly.
Circuitry locked
Cuff may not be
aligned correctly.
The batteries
have run down.
Remove then reinsert
the batteries and
then proceed to take
measurement again.
Read page 16
(Applying the Cuff).