Filter
Top Products
PS250 User Instructions 3
Safety
Warnings
Safe installation
Take care when lifting and transporting heavy objects.
Do not overload the machine. Take care not to exceed the
weighing capacity of the machine.
Pluggable equipment must be installed near an easily
accessible socket outlet. Permanently connected equipment
must have a readily accessible disconnect device incorporated
in the fixed wiring.
For your protection all mains (110V or 230V) equipment used
out of doors or in wet or damp conditions should be supplied
from a correctly fused source and protected by an approved
RCD to BS7071 or BS7288 or BS4293.
The mains lead must be connected to a supply outlet with a
protective earth contact. The electrical supply at the socket
outlet must provide overcurrent protection of an appropriate
rating.
IF IN DOUBT SEEK ADVICE FROM A QUALIFIED
ELECTRICIAN.
Safe use
To avoid the possibility of electric shock or damage to the
machine, always switch off the machine and isolate from the
power supply before carrying out any routine maintenance.
Cleaning the machine
CAUTION: Harsh abrasives, solvents, scouring cleaners and
alkaline cleaning solutions, such as washing soda, should not
be used especially on the display windows. Under no
circumstances should you attempt to wipe the inside of the
machine.