Filter
Top Products
8
Reminders on the VPAP LCD
Your clinician may have set your VPAP device to remind you about important events,
such as when to replace your mask, when to insert your Data Card and so on.
The reminder message is displayed on the LCD and is visible if the device is not
delivering therapy. The backlight on the LCD flashes when a message is displayed.
Your clinician can set any of the following reminders on your LCD:
Smart Data™
Smart Data menus only appear if enabled by the clinician. Your clinician can set any
of the following Smart Data options:
Message Description Action
INSERT
CARD
May appear if your device is
Data Card enabled.
Insert your Data Card and follow any
instructions that your clinician has given you.
When you have done this, the message will
disappear from the LCD. Pressing (Ok)
will also remove the message.
REPLACE
MASK
Reminds you that your mask
is due for replacement.
Press (Ok) to remove the message
from your LCD and replace your mask with a
new one.
CALL
PROVIDER
Reminds you to contact your
clinician; for example to
discuss your therapy.
Press (Ok) to remove the message
from your LCD and contact your clinician/
service provider.
REPLACE
FILTER
Reminds you to replace the
air filter on your device.
Press (Ok) to remove the message
from your LCD and replace the air filter.
SERVICE
DUE
Reminds you to return your
device for service.
Press (Ok) to remove the message
from your LCD and contact your clinician/
service provider.
Customised
messages
Your clinician may also set
reminders for other reasons;
for example to call a
particular person or number.
Press (Ok) to remove the message
from your LCD and contact your clinician/
service provider.
Message Description
PRESSURE Displays the therapy pressure from the previous session.
MASK FIT Displays the mask-fit star rating from the previous session.
USAGE Displays the usage hours from the previous session.
AUTO APPEAR If ON is selected, Smart Data screens are automatically displayed
when you turn on your device.