ResMed Stellar 150 Oxygen Equipment User Manual


 
31Technical specifications
English
Symbols
Follow instructions for use; Class II equipment;
Type BF applied part;
Bell (Remote Alarm);
IP31
Device is protected against solid foreign objects of 2.5 mm
diameter and greater and vertically falling water drops; Caution; General warning
sign (see H4i connector plug and AC conn
ection on the device); Standby or preparatory
state for a part of equipment; Connection for oxygen supply;
max 30 l/min
(max 30 L/
min); Data port; CE labeling in accordance with EC di
rective 93/42/EEC, class II b;
Temperature limitation for storage and transport; Handle with care; Maximum
humidity; Keep dry; Manufacturer; Upside; Catalogue number;
Serial number;
Batch code; Do not re-use; Use by date; Keep
away from sunlight; Do not use if package is damaged;
Latex-free
Environmental information This device must be disposed of in accordance with the laws
and regulations of the country in which disposal occurs.
The crossed-out wheeled bin symbol indicates that the prod
uct bearing this symbol
may not be disposed of together with general ho
usehold waste, but instead requires
separate disposal. This requirement for separate disposal is based on the European
Directive 2002/96/EC for electrical and electronic equipment, and the European Directive
2006/66/EC for batteries. You can hand in the product at a municipal collection point, for
example. This reduces the impact on natural resources and prevents contamination of the
environment through the release of hazardous substances.
Batteries containing more than 0.0005 percent of mercury b
y mass, more than 0.002
percent of cadmium by mass or more than 0.004 percent of lead by mass are marked
below the crossed-bin symbol with the chemical symbols (Hg, Cd, Pb) of the metals for
which the limit is exceeded.
For further information regarding product disposal,
please contact your local ResMed office
or your specialist distributor, or visit our website at www.resmed.com.
Dispose of used air filters and air tubings according to the
directives in your country.
- 20 °C
+ 60 °C
- 4 °F
+ 140 °F
LATEX