Filter
Top Products
4
How to Use the Control Panel
The control panel of the S8 Series II includes an LCD screen which displays the
menus and treatment screens as well as a keypad for navigating through the
menus and delivering treatment.
The S8 Series II keypad has the following keys:
The keypad and LCD are equipped with backlights that come on when the device
is powered. The LCD backlight turns off after two minutes of inactivity, and
comes back on when you press a key. The keypad backlight is always on while
the S8 Series II is on.
Selecting the Mask Type
To ensure your device functions as intended with your selected mask, you need to
select the mask type that you are using.
1 With the RAMP or SETTLING screen displayed, press . (In CPAP mode, the
standby screen displays RAMP. In AutoSet mode (S8 AutoSet Spirit II only) the
standby screen displays SETTLING.)
2
Press until MASK is displayed.
3
Press to change the setting.
Key Function
Start/Stop
Starts or stops treatment.
Up
Allows you to increase settings options and scroll through
the S8 Series II menu.
Down
Allows you to decrease settings options and scroll through
the S8 Series II menu.
Left
Performs the function indicated by the guiding text
displayed above it on the LCD screen (eg, change).
Right
Performs the function indicated by the guiding text
displayed above it on the LCD screen (eg, exit)
.
LCD screen
Start/Stop key
Keypad